Linear Guide Types

linear rail guide brands

Linear guide systems are designed to take the lateral and axial loads on themselves while the load on the machine axes is transferred from one point to another.Many linear bearing types have been produced according to the amount of load to be transported or resisted, the angle of the load and environmental conditions.For example, linear guides to be used in a large press feed line, roller guide rails are generally preferred because the load will be too high.While choosing the linear guide, the speed, load, working frequency and environmental factors of the system are taken into consideration.

Also, linear guides have different sizes among themselves according to the conditions of the areas they will be assembled.There are different models such as short wide, short narrow, long wide, long narrow or narrow low.

Continue reading “Linear Guide Types”

Ball Transfer Units by Mounting Types

Ball transfer units are very useful parts for product handling and transfer operations in many types of machines.These load-bearing parts are manufactured in different types according to each job and place of use.We will now examine a few of these assembly and product types together.
First of all, let’s consider the title of ball transfer units according to the assembly types.Commonly used mounting directions are as follows.

1-Thread Fixing Units

thread fixing ball transfer
thread fixing ball transfer

It is assembled by inserting into the threaded hole which opened on the machine body or by tightening with nut.It is not a preferred type because of the difficulty of positioning.

Continue reading “Ball Transfer Units by Mounting Types”